Description
- Atomic time (Manual set option) and automatic DST updates (on/off)
- Curved LED with bright 1.8Time display
- 1 amp USB charging port (charge cable not Included)
- Dual alarms (A1 & A2) with 4 stage ascending sound
- Programmable snooze (5-60 minutes) and adjustable brightness & volume
- POWER UP: 1.Insert the provided stand into bottom of clock. 2. Insert the 5.0 volt power cord into an outlet, then into your clock. Remove the insulation tab from the CR2032 battery Note on the WWVB ATOMIC TIME SIGNAL
- IMPORTANT: When powered on, the clock will immediately search for the WWVB Atomic Time Signal for 7 minutes. Hold the ATOMIC button for 3 seconds to stop or start the search. During the atomic time search the buttons will not function. Backlight will dim. USB charge port will not work. Signal Search Indicator: Receiving strong WWVB signal: LED flashing Successful Reception: LED solid Failed Reception: LED disappears The clock will automatically search for the WWVB signal every night at 1:00 am, 2:00 am and 3:00 am.
- If there is still no WWVB reception, the clock will search WWVB time signal again at 4:00 am and 5:00 am alternatively. For best WWVB Atomic Time Signal Reception: Please keep your clock three feet away from electrical outlets and other electronics, to avoid interference
