Description
Prevent emitters from clogging by blocking particulates in water with the “Y” Filter. This component has a ¾ in. MPT connection point on both ends to connect to ¾ in. FPT spigot or pipe, such as a sprinkler riser in the ground. Pipe threads create a watertight seal when screwed tightly together. To install, position the directional arrow in the direction of water flow. The “Y” filter comes with a 150-mesh filter that’s easily removable for maintenance; just unscrew the flush cap or cleanout cap, remove the middle housing, and pull out the filter to clean. The “Y” Filter is made of acrylonitrile butadiene styrene (ABS), and contains a polyvinyl chloride (PVC) washer with polyester filter, all treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the “Y” filter is an essential component for keeping particulates from clogging and potentially damaging emitters to help keep your system running smoothly.
- Prevents particulates from clogging and potentially damaging emitters; Connect onto a ¾ in. FPT spigot or pipe, such as a sprinkler riser
- Thread ¾ in. MPT connection point to ¾ in. FPT pipe, such as a sprinkler riser; Use with a ¾ in. FPT Swivel Adapter to connect supply tubing
- Thread the “Y” filter onto the ¾ in. FPT spigot or pipe; Periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water; the filter can also be removed from the middle housing and pulled out to clean
- 150-mesh filter washer blocks particles in the water from clogging emitters; filter is removable for cleaning and maintenance; “Y” Filter can be removed from the middle housing to clean
- Comes with one ¾ in. MPT X ¾ in. MPT “Y” Filter
