Description
Berger Everglow has been specially formulated to provide protection against cracking, peeling and chalking whilst offering salt and dirt-resistant properties. Everglow is fungus and algae resistant and is easy to apply by brush, roller or spray. Its superb adhesion, great coverage and easy clean-up in water make Everglow a great product for wood and wall.
Surface preparation:
- Previously painted surfaces should be sound and cleaned thoroughly
- Rub down with fine grade sandpaper and prime with appropriate Berger Primer
- Concrete should be free from loose sand and efflorescence
- Wire-brush Lime-washed surfaces and prime in Penetrating Liquid or Alkali Sealer
Application Procedure:
- Brush, Roller or Spray
- Stir gently before application to avoid the incorporation of air
- For best results, apply one coat of Berger Alkali Sealer to prime all new concrete/cement surfaces
- Before applying to wood, apply one coat of Berger Grip & Seal Multi-Surface Primer
Tips: Make sure to use the right roller for the job. Use a 10-12mm nap on walls and 20-32mm nap covers on rough surfaces like concrete or textured walls.
