Description
Micro Milling Concrete Mix blends Sand, Fine Aggregate, and Cement.
USES
Repairing concrete, setting posts, anchoring poles, casting driveways, walkways, and steps.
APPLICATION
- Empty contents into a mechanical mixer, wheelbarrow, or a smooth, non-porous surface.
- Add approximately 3 US Quarts/50lbs bag and mix thoroughly until a workable consistency is achieved.
- Avoid a soupy mix. Excess water reduces strength and durability and can cause cracking.
- When repairing concrete, remove all loose material. Dampen adjoining concrete surfaces.
- Place Micro Milling Concrete Mix and work the material into the voids, then level the surface with a straight edge. Allow freshly placed concrete mix to set for about 30 minutes to one hour or until the surface water has begun to disappear. Use a float to smooth the finish. For a rougher surface, use a broom.
- Keep the material damp for several days. Avoid foot traffic for 24 hours.
- 1 50 lbs bag is equivalent to approximately 0.4 cubic ft.
Clean hands and tools with soapy water before materials dry.
CAUTION: During mixing or application, avoid contact with eyes and skin. In case of contact with the eyes, rinse repeatedly with water and call a physician. Wash thoroughly after handling. Do not take internally.STORAGE & SHELF LIFE: 12 months from the date of manufacture in unopened bags that are properly stored.
Safety Data
Use personal protective equipment (gloves, boots, goggles, and a mask) when handling or using all Micro Milling Ltd products.
