Description
Trowel-On is a heavy-bodied textured finish, available in a range of textures to suit every surface: ultra-fine, fine, coarse and ultra-coarse. A one-coat application which protects and obliterates concrete and rendered walls. Ideally suited to mask uneven rendered surfaces, cover imperfections and hide irregularities. Can be used as a one- coat finish to new work, previously coated surfaces and flush pointed block work.
Surface preparation:
- New and previously painted surfaces should be dry and free from contaminants e.g. loose sand, efflorescence, peeling paint
- Matte glossy surfaces
- Wire-brush friable & flaking surfaces
- Etch smooth concrete with Berger Concrete Etching Solution. Rinse surface after 30 minutes and allow to dry
Application Procedure:
- Steel Float and Plastic Trowel required
- Float evenly over the surface of the substrate with the Steel Float
- Allow to set for 3 – 15 minutes
- Use the plastic trowel in a circular motion over the surface to create desired pattern
- 14 sq. m/19L container. 2.3 kg/sq. m
- NB: Coverage will vary depending on texture chosen and surface condition
- No thinning needed. Clean up with water
- Ask for technical support on spray application
